Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

Taimi Orifice swivel, ORFS style - 1 3/16-12 UN thread

Développer

Caractéristiques techniques [ + ]

Taimi cartridge swivel fittings are designed to be integrated directly into the hydraulic manifold. When installed, the fitting provides a superior, rugged and low-profile swivel port that can withstand high pressures and side loads.

Incorporates a patented, ball-less design that can't be disassembled.
Includes triple seal protection.
Includes three hose connection types for ease of integration.
Provides protection against pressure spikes.
More styles are available at www.taimi.ca.

Retour Vers le Haut

Caractéristiques [ + ]

Pression maximale de fonctionnement	6250 psi430 bar
Matière des Joints	VitonViton
Matière	4140 HT Steel4140 HT Steel
Couple de serrage	325 - 375 lbf ft440 - 505 Nm
Diamètre	2.09 in.2.09 in.
Length	3 in.3 in.
Manufacturer P/N	SZ4-12-S01MSZ4-12-S01M
Extension Dimension	1,81 in.1,81 in.
Taille de l'Orifice	1 3/4-12 UN-1B1 3/4-12 UN-1B
Body Hex	1"3/4 in.1"3/4 in.
Connection Thread	1 3/16-12 UN1 3/16-12 UN
Poids du composant	1,24 lb0.56 kg

Retour Vers le Haut

Notes [ + ]

Due to high torque requirements, Taimi swivel fittings are only available in ductile iron manifolds.

Retour Vers le Haut

Ressources Complémentaires [ + ]

Technical Information

Retour Vers le Haut

336001012 | Accessoires » Taimi Swivel Fittings | Sun Hydraulics

Assembly Build Process

Assembly Build Process

Taimi Orifice swivel, ORFS style - 1 3/16-12 UN thread

Footer