Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

Faster flat face ISO 16028 coupling - FFH style - SAE-12

Développer

Caractéristiques techniques [ + ]

Faster FFH style, flat face couplings provide quick release connections to Sun's integrated packages, helping to prevent contamination and spillage.

Flat valve shut-off system contributes to prevent contamination and spillage.
'Push to connect' connection type
Connection under pressure not allowed
Applications include agriculture, construction, industrial, mobile

Retour Vers le Haut

Caractéristiques [ + ]

Pression maximale de fonctionnement	5000 psi350 bar
Matière des Joints	Buna NBuna N
Matière	Zinc Nickel Plated SteelZinc Nickel Plated Steel
Length	3.98 in.101,1 mm
Nominal Size	3/4"3/4"
Hex Size	42 mm (1.65 in.)42 mm (1.65 in.)
Manufacturer P/N	FFH12-1/34SMFFH12-1/34SM
Extension Dimension	3.38 in.85,9 mm
Working Temperature	-25 °C to 100 °C-25 °C to 100 °C
Surface Treatment	MATE 1000 (Zn-Ni)MATE 1000 (Zn-Ni)
Taille de l'Orifice	SAE -12SAE -12

Retour Vers le Haut

Performance Curves [ + ]

Performance Curve for 335003034: Faster flat face ISO 16028 coupling - FFH style - SAE-12

Retour Vers le Haut

Ressources Complémentaires [ + ]

Technical Information

Retour Vers le Haut

335003034 | Accessoires » Faster Quick Disconnect Couplings | Sun Hydraulics

Assembly Build Process

Assembly Build Process

Faster flat face ISO 16028 coupling - FFH style - SAE-12

Footer