Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

Ajustable amortiguador de manómetro , macho SAE-4 a femenina 1/4 NPTF

Expand All

Technical Features [ + ]

SUN adjustable gage snubbers are throttling and shut-off devices used to isolate and protect hydraulic gages from line pressure transients and the resulting gage pointer pulsations.

Snubbers with a male SAE thread are adjustable allowing the knob to be pointed in any direction.
Zero leakage at shutoff.
Gage snubber backup seals are "PTFE" (Teflon®, product of E. I. DuPont Co.).
Material: 303 and 416 stainless. Knobs are glass-filled nylon.

Technical Data [ + ]

Maximum Operating Pressure	6000 psi420 bar
Seal Material	VitonViton
Adjustment - No. of CCW Turns from Fully Closed to Fully Open	3.753.75
Effective Orifice Size	.035 in.0,9 mm
Port Configuration	SAE 4 (Male), .250 NPTF (Female)SAE 4 (Male), .250 NPTF (Female)
Material	acero inoxidableacero inoxidable

FAQs [ + ]

Your gage line fuse is just what I want, but I need a setting of 2 gpm (7,5 L/min.).

Sorry, the design of the NQAA does not lend itself to other settings. Its claim to fame is that when the gage is broken off the manifold, the working parts of the fuse stay in the port and prevent excess loss of oil. It is a gage line fuse, nothing more.

Additional Resources [ + ]

Technical Tips

Circuit Savers (466.24 KB)

Technical Information

Sun's Floating Style Screw-In Cartridge (1.06 MB)

NSABKXVAS | Accesorios » Amortiguadores de Manómetros/Adaptadores/Fusible de Línea | Sun Hydraulics

Assembly Build Process

Assembly Build Process

Ajustable amortiguador de manómetro , macho SAE-4 a femenina 1/4 NPTF

Footer