Serie 1 - cavidad T-11A, buna-N cartucho juego de sellos
![990411007 : Serie 1 - cavidad T-11A, buna-N cartucho juego de sellos](https://cmsimages.sunhydraulics.com/skg_t11a3.gif)
Technical Features [ + ]
Sun offers replacement seal kits for all cartridge models. These kits include all of the external seals on the cartridge along with installation instructions. Seal kits are available in Buna-N and Viton for all models, along with EPDM and polyurethane for many models. Please note: Converting the external seals from one material to another does not ensure fluid compatibility with that material due to the existence of internal seals within the cartridge.
- The shelf life for this cartridge seal kit is ten years from date of purchase. This date will be printed on the kit packaging.
Cartridge Installation Data [ + ]
Series | 1 |
Cartridge Series | 11 |
Cartridge Thread | M20M20 |
Valve Hex Size | 7/8 in.22,2 mm |
Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
cavidad | T-11A |
Used With [ + ]
What models can this kit be used with?
- DMDA 3-vías, direccional, operada por solenoide carrete válvula
- DMDAS 3-vías, cambio suave , direccional, operada por solenoide carrete válvula
- DMDAZ3-vías, direccional, operada por solenoide carrete válvula con indicador de posición
- DMDM 3-vías, manually operated, direccional carrete válvula
- DWDA3-vías, acción-directa , direccional, operada por solenoide disco válvula
- DWDF 3-vías, acción-directa , direccional, operada por solenoide disco válvula (740 Series)
- DWDM 3-vías, manually operated, direccional disco válvula
- FMDA Electro-proporcional 3-vías control de caudal válvula , alimentación regulada
- FMDB Electro-proporcional 3-vías control de caudal válvula , alimentación regulada
Notes [ + ]
- Install back-up rings and O-rings as shown in views.
- See installation variations for models associated with alternative installation views.
- When installing continuous back-up rings, use the same technique and the same care used to install O-rings.
- When installing cartridge - be sure to torque to recommended value.
Additional Resources [ + ]
Technical Information