Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

ISO 03 aplilables distribuidor de circuito integrado hidráulico buna-N juego de sellos

Expand All

Technical Features [ + ]

Sun ISO 03 sandwich bodies are designed for multi-functional use to permit maximum circuit flexibility. To provide this versatility, most ISO 03 sandwich bodies do not have counterbores for installing O-ring seals. Instead, these bodies use a special seal retainer plate with a raised "Nib" and a locating "Notch". A corresponding nib locating hole and notch locating arrows are included on applicable ISO 03 sandwich bodies to ensure proper plate alignment. For those ISO 03 sandwich bodies where rotation is not functionally feasible, counterbores are included on the sealing faces and no retainer plate is required. Seal retainer plate only, seals only, and combination kits are available.

All Sun seal plates are manufactured to current industry standards regarding passages and mounting bolt locations.
The ISO 03 sandwich body can be rotated about two axes. Depending on the rotation of the sandwich body in relation to the seal retainer plate, both the "A" and "B" and the "P" and "T" passages can be reversed.
Multi-function bodies are "NOTCH" stamped for all possible mounting positions and all positions should be carefully inspected to ensure that the intended function is properly installed.
In every installation, the seal retainer plate nib must be oriented toward the Sun sandwich valve and away from the sublate or manifold. All locating nibs in the sandwich stack must point away from the subplate.
Seal retainer plates are included with and used on all ISO 03 sandwich bodies where rotation is functionally feasible.
Seal retainer plates are constructed of zinc-plated, cold rolled steel.

Technical Data [ + ]