778 Series, 12 VDC bobina con ISO/DIN 43650, Form A conector without TVS Diode, common cavity
Technical Features [ + ]
- Coil windings utilize Class H, (356 °F [180 °C] rated) magnet wire.
- Power cable with mating connector is required and is not included with the coil.
- The coil is magnetically symmetrical and can be mounted on the solenoid tube in either direction for best cable access without affecting performance.
- IP rating for this coil is IP65.
- This coil does not include a transient voltage suppression (TVS) diode and should only be used when surge suppression is included elsewhere in the electrical system.
Technical Data [ + ]
Arc Suppression (TVS) | NoneNone |
Maximum Ambient Temperature | 104 °F40 °C |
Power Consumption at 68°F (20°C) cold - at rated voltage | 36.9 watts36.9 watts |
Maximum Coil Temperature at 104°F (40°C) Ambient | 284 °F140 °C |
Voltage/Frequency | 12 VDC12 VDC |
Operating Voltage Range | +/- 10% nominal+/- 10% nominal |
Duty Cycle Rating | 100 %100 % |
conector | ISO4400 - EN/DIN175301-803, Form A (ISO/DIN 43650) 3-pinISO4400 - EN/DIN175301-803, Form A (ISO/DIN 43650) 3-pin |
Solenoid Tube Diameter | .75 in.19 mm |
Coil Nut Torque | 3.5 - 3.9 lbf ft4,8 - 5,3 Nm |
Model Weight | .62 lb.62 lb |
Proportional Performance Data [ + ]
Resistance at 20º C | 3.9 ohms ±7%3.9 ohms ±7% |
Maximum Current (100% Duty Cycle at Maximum Ambient Temperature) | 1660 mA1660 mA |
Used With [ + ]
What models can this kit be used with?
- FNUC 4-vías, 3-posiciones, electro-proporcional , direccional, operada por solenoide válvula , 3600 psi (250 bar) - common cavity
Additional Resources [ + ]
Realces
Technical Information