Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

230 VAC 50/60 Hz bobina con ISO/DIN 43650, Form A conector con TVS Diode

Expand All

Technical Features [ + ]

Coil windings utilize Class N, (392° F [200 °C] rated) magnet wire.
Power cable with mating connector is required and is not included with product.
This coil is CE compliant. It meets the requirements of the Low Voltage Directive (2006/95/EC) and EN 60204-1:2006.
Alternating current (AC) coils are DC coils that contain an integral full wave rectifier, model code 2W10G, molded into the coil. Because of this, there is no pull-in current and coils don't burn out if something prevents the valve from shifting.
A TVS surge suppression diode is built into DC coils. Nominal breakdown voltage; 400V.Model code 1.5 KE400CA. Steady state power dissipation @ 75°C is 6.5 W and peak pulse dissipation is 1500 W for 1 ms, nonrepetitive.
The coil is magnetically symmetrical and can be mounted in either direction on the solenoid tube without affecting performance.
IP rating is dependent on the coil connector and the mating connector used.
RoHS compliant. Restricted materials less than 0.1% total by weight.
The external steel shell is plated with clear zinc trivalent.

Technical Data [ + ]

Maximum Coil Temperature at 68ºF (20ºC) Ambient	218ºF (105ºC)218ºF (105ºC)
Arc Suppression (TVS)	IncludedIncluded
Power Consumption (cold) - at rated voltage	22 watts22 watts
Maximum Ambient Temperature	122 °F50 °C
Voltage/Frequency	230 VAC 50/60 Hz230 VAC 50/60 Hz
Operating Voltage Range	+/- 10% nominal+/- 10% nominal
Duty Cycle Rating	100 %100 %
conector	ISO4400 - EN/DIN175301-803, Form A (ISO/DIN 43650) 3-pinISO4400 - EN/DIN175301-803, Form A (ISO/DIN 43650) 3-pin
Connector Environment Rating	IP65/IP67IP65/IP67
Solenoid Tube Diameter	.75 in.19 mm
Coil Nut Torque	4.5 lbf in.0,5 Nm

Used With [ + ]

What models can this kit be used with?

DAAL
2-vías , direccional, operada por solenoide carrete válvula - capacidad de pilotaje
DAALS
2-vías , cambio suave , direccional, operada por solenoide carrete válvula - capacidad de pilotaje
DBAL
3-vías, direccional, operada por solenoide carrete válvula - capacidad de pilotaje
DBALS
3-vías, cambio suave , direccional, operada por solenoide carrete válvula - capacidad de pilotaje
DFCA
2-vías , 2-stage, direccional, operada por solenoide disco válvula - caudal 1-2
DFCB
2-vías , 2-stage, direccional, operada por solenoide disco válvula - caudal 2-1
DFDA
2-vías , 2-stage, direccional, operada por solenoide disco válvula - caudal 1-2
DFDB
2-vías , 2-stage, direccional, operada por solenoide disco válvula - caudal 2-1
DFEA
2-vías , 2-stage, direccional, operada por solenoide disco válvula - caudal 1-2
DFEB
2-vías , 2-stage, direccional, operada por solenoide disco válvula - caudal 2-1
DFFA
2-vías , 2-stage, direccional, operada por solenoide disco válvula - caudal 1-2
DFFB
2-vías , 2-stage, direccional, operada por solenoide disco válvula - caudal 2-1
DLDA
2-vías , direccional, operada por solenoide carrete válvula
DLDAS
2-vías , cambio suave , direccional, operada por solenoide carrete válvula
DLDAZ
2-vías , direccional, operada por solenoide carrete válvula con indicador de posición
DMDA 3-vías, direccional, operada por solenoide carrete válvula
DMDAS 3-vías, cambio suave , direccional, operada por solenoide carrete válvula
DMDAZ
3-vías, direccional, operada por solenoide carrete válvula con indicador de posición
DNCA 4-vías, 2-posiciones , direccional, operada por solenoide carrete válvula con transición cerrada
DNCAZ
4-vías, 2-posiciones , direccional, operada por solenoide carrete válvula con transición cerrada y indicador de posición
DNDA 4-vías, 2-posiciones , direccional, operada por solenoide carrete válvula
DNDAS 4-vías, 2-posiciones , cambio suave , direccional, operada por solenoide carrete válvula
DNDC 4-vías, 3-posiciones, direccional, operada por solenoide carrete válvula
DNDY 2-posiciones , 6-vías, direccional, operada por solenoide carrete válvula
DNDYS 2-posiciones , 6-vías, cambio suave , direccional, operada por solenoide carrete válvula
DTCA
2-vías , acción-directa , direccional, operada por solenoide blocking disco válvula con superponer
DTCAZ
2-vías , acción-directa , direccional, operada por solenoide blocking disco válvula con superponer y indicador de posición
DTDA
2-vías , acción-directa , direccional, operada por solenoide blocking disco válvula
DTDAS
2-vías , acción-directa , cambio suave , direccional, operada por solenoide blocking disco válvula
DWDA
3-vías, acción-directa , direccional, operada por solenoide disco válvula
HDDA 2-vías , direccional, operada por solenoide disco válvula - después del anti-retorno

Additional Resources [ + ]

Realces

Technical Information

Environmental Test Specification for Electrical and Electronic Co (254.61 KB)
Sun's Floating Style Screw-In Cartridge (1.06 MB)
XMD Coil Clip Installation Guide (749.23 KB)
CE Declaration of Conformity - XMD 12-2017 (133.69 KB)
Declaration of Conformity for Sun Coils (1.12 MB)

770223 | Accesorios » Bobinas | Sun Hydraulics

Assembly Build Process

Assembly Build Process

230 VAC 50/60 Hz bobina con ISO/DIN 43650, Form A conector con TVS Diode

Footer