Baugruppe erstellen

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

Montagewerkzeug für Ventile mit Z-Verstellung, Serie 3

Alle expandieren

Technische Eigenschaften [ + ]

Dieses Werkzeug wird benötigt, um Ventile LO** und LK** der Serie 3 mit Stellungsüberwachung zu installieren.

Zurück nach oben

Technische Daten [ + ]

Werkstoff	StahlStahl
Anzugsdrehmoment	150 - 160 lbf ft203 - 217 Nm
Gewicht	.55 lb0,25 kg

Zurück nach oben

Hierzu kombinierbare Produkte [ + ]

What models can this kit be used with?

LKHCZ Entsperrbar durch Steuerdruck, in Ruhestellung geschlossen, Nicht druckausgeglichene Sitzbauweise 2/2-Wege Logikelement mit Stellungsüberwachung
LOGCZ Sperrbar durch Steuerdruck, in Ruhestellung geschlossen, Nicht druckausgeglichene Sitzbauweise 2/2-Wege Logikelement mit Drosselkerben und Stellungsüberwachung
LOHCZ Sperrbar durch Steuerdruck, in Ruhestellung geschlossen, Nicht druckausgeglichene Sitzbauweise 2/2-Wege Logikelement mit Stellungsüberwachung
LOHOZ Sperrbar durch Steuerdruck, in Ruhestellung offen, Nicht druckausgeglichene Sitzbauweise 2/2-Wege Logikelement mit Stellungsüberwachung

Zurück nach oben

Zusätzliche Hilfsmittel [ + ]

Technische Informationen

Zurück nach oben

998100Z03 | Zubehör » Cartridge Retainers and Special Tools | Sun Hydraulics

Baugruppe erstellen

Baugruppe erstellen

Montagewerkzeug für Ventile mit Z-Verstellung, Serie 3

Footer