Baugruppe erstellen

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

ISO 05 Gewindestangen und Innensechskantmuttern, Gewinde 1/4-20

Alle expandieren

Technische Eigenschaften [ + ]

Um den Einbau der ISO 03 und ISO 05 Zwischenplatten zu erleichtern, liefert SUN metrische und zöllige Schrauben und Gewindestangen, die vor Ort auf die erforderliche Länge zugeschnitten werden können. Die Schrauben und Gewindestangen dienen als Führung beim Zusammenbau der Zwischenplatten-Höhenverkettung. Wenn das Wegeventil auf die Zwischenplatte aufgesetzt ist, wird die Höhenverkettung mit speziellen Muttern von SUN festgeschraubt.

Innensechskantmuttern haben den gleichen Aussendurchmesser wie Standard Innensechskant-Schraubenköpfe.
Volle Einschraubtiefe.
Ein mechanische Anschlag zwischen dem Innensechskant und dem Gewinde verhindert, dass der Innensechskantschlüssel aus dem Sechskant gedrückt wird.

Zurück nach oben

Technische Daten [ + ]

Empfohlenes Anzugsdrehmoment	108 lbf in.12 Nm
Größe des Innensechskants	3/16"3/16"
Gewinde	1/4-201/4-20
Gewindestangenlänge	Customer Specified in increments of .062 in.Customer Specified in increments of .062 in.
Minimale Zugfestigkeit	125,000 psi8620 bar
Minimale Dehngrenze	105,000 psi105,000 psi
Härte	26 - 32 Rc26 - 32 Rc