Baugruppe erstellen

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

XMD Serie, 3 m Kabel mit 12-poligem Deutsch-Stecker, zweikanalig

Alle expandieren

Technische Eigenschaften [ + ]

Das Kabel mit einem 12 Pin Deutsch Stecker ist für den Betrieb von zwei Spulen mit SUNs elektrohydraulischen Verstärker XMD-02 geeignet.

Der ausgeführte Kabelbaum erfüllt IPC-A-620 Class 2
Schwarzes Litzenkabel nach UL 3289 CSA, Kabeldurchmesser nach AWG-Nr. 18
Zugelassen bis 150°C
XLPE Isolierung
Zugelassen für 750 VDC und 600 VAC

Zurück nach oben

Technische Daten [ + ]

Länge	3 m3 m
Steckverbinder	Molex 93445-6212, Keying Option A, GreyMolex 93445-6212, Keying Option A, Grey

Zurück nach oben

Hierzu kombinierbare Produkte [ + ]

What models can this kit be used with?

991713030 XMD Serie, 30 cm Kabel mit 2-poligem Deutsch-Stecker
991713060 XMD Serie, 60 cm Kabel mit 2-poligem Deutsch-Stecker
XMD-02 Konfigurierbarer, zweikanaliger Verstärker für elektrisch betätigte Proportional- und Schaltventile

Zurück nach oben

Zusätzliche Hilfsmittel [ + ]

Highlights