Baugruppe erstellen

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

Taimi Anschluss swivel, BSPP style - G 1"

Alle expandieren

Technische Eigenschaften [ + ]

Taimi Einschraub-Schwenkverschraubungen sind so konzipiert, dass sie direkt in den Steuerblock integriert werden können. Die installierte Verschraubung bietet eine hochwertige, robuste und flache Schwenkverbindung, die hohen Drücken und seitliche Belastungen standhalten kann.

Das patentierte Design benötigt keine Kugeln und kann nicht demontiert werden.
Inklusive dreifachem Dichtungsschutz.
Erhältlich für drei verschiedene Schlauchanschlüsse für eine einfache Integration.
Provides protection against pressure spikes.
Weitere Varianten sind auf www.taimi.ca verfügbar.

Zurück nach oben

Technische Daten [ + ]

Dichtungsmaterial	VitonViton
Werkstoff	4140 HT Steel4140 HT Steel
Anzugsdrehmoment	325 - 375 lbf ft440 - 505 Nm
Durchmesser	2.22 in.2.22 in.
Länge	3.47 in.3.47 in.
Manufacturer P/N	SZ4-16-P01MSZ4-16-P01M
Extension Dimension	2.22 in.2.22 in.
Anschlussgröße	1 7/8-12 UN-1B1 7/8-12 UN-1B
Body Hex	1 7/8 in.47,6 mm
Connection Thread	G 1"G 1"
Gewicht	1.55 lb0,70 kg

Zurück nach oben

Info [ + ]

Aufgrund des hohen Anzugsmoment sind Taimi Drehverschraubungen nur für Graugussgehäuse verfügbar.

Zurück nach oben

Zusätzliche Hilfsmittel [ + ]

Technische Informationen

Zurück nach oben

336002016 | Zubehör » Taimi Swivel Fittings | Sun Hydraulics

Baugruppe erstellen

Baugruppe erstellen

Taimi Anschluss swivel, BSPP style - G 1"

Footer