Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

Serie 1 a prueba de alteraciones cubierta, combinación juego de control

Expand All

Technical Features [ + ]

Sun Hydraulics introduces a new style of tamper resistant cap for Series 1 cartridges. The deep drawn metal can (zinc plated steel) has been replaced by a black Delrin®, injection molded cap. This new design is easier to install, more tamper resistant and does not corrode. All of Series 1 products with a 'C' control are currently being shipped with the new style tamper resistant cap.

This combination kit contains (1) Black plastic cap, and (1) Zinc plated steel cap.

For use on all Sun cartridges with an L control.
The tamper resistant cover is designed to be a non-removable item. Once removed, it can not be re-assembled to the cartridge.
The new plastic (black) covers will only fit those cartridges designed to accept them. Metal covers will fit all cartridges within the applicable series the cover was designed for.

Technical Data [ + ]

For Cartridge Models	Series 1 CounterbalanceSeries 1 Counterbalance
Material	combinacióncombinación
Cover inside diameter	.75 in.19 mm
Length	1.05 in.26,7 mm

Additional Resources [ + ]

Realces

Sun’s Maximum Setting Limiter

Technical Information

Sun's Floating Style Screw-In Cartridge (1.06 MB)

991038 | Accesorios » Opciones de Control para Cartuchos | Sun Hydraulics

Assembly Build Process

Assembly Build Process

Serie 1 a prueba de alteraciones cubierta, combinación juego de control

Footer